Follow us: Twitter Facebook Instagram LinkedIn Join SMC

2014 Archives

TC Leadership

Ming-Yih Lee

TC Co-Chair

Ming-Yih Lee (This email address is being protected from spambots. You need JavaScript enabled to view it.)
Chang Gung University, Taiwan



Yi-Hung Liu

TC Co-Chair

Yi-Hung Liu (This email address is being protected from spambots. You need JavaScript enabled to view it.)
Chung Yuan Christian University, Taiwan

Chung-Hsien Kuo

TC Co-Chair

Chung-Hsien Kuo (This email address is being protected from spambots. You need JavaScript enabled to view it.)
National Taiwan University of Science and Technology




Our Goal

Advances in the life sciences and in medical technology have positioned bio-medical technology as a major driver in the global knowledge-based economies. A successful medical intervention depends not only on the capability or experience of clinicians, but also the adequacy of medical instruments and devices. In addition, the technical aids and assistive devices for elderly or disabled are getting more attention for aging society all over the world, and they are widely used in daily life. As a result, medical mechatronics becomes an important emerging technology in the 21st century. The mission of the Medical Mechatronics Technical Committee is to establish a medical mechatronics research gateway that provides a platform for sharing the specialized knowledge, experiences and results in the area of medical mechatronics internationally. In addition, the TC on Medical Mechatronics would endeavor to foster research, development, training and dissemination of the art and science of medical devices and modalities.


Members

Systematic System Design Group:

  • Chun Chang Chang, National Tainan University, Taiwan
  • C.L. Philip Chen, University of Macau, China
  • I-Ming Chen, Nanyang Technology University, Singapore
  • Jing-Shiang Chen, National Tsing Hua University, Taiwan
  • Zhi-Ning Chen, Institute for Infocomm Research, Singapore
  • Jyun-Cheng Cheng, National Yunlin University of Science and Technology, Taiwan.
  • Rong-Fong Cheng, Chang Gung University, Taiwan
  • Yo-Ping Huang, Ta Tang University, Taiwan
  • Koichi Ito, Chiba University, Japan
  • Kwoh Chee Keong, Nanyang Technology University, Singapore
  • Fujiang Lin, University of Science and Technology of China, P.R. China
  • Ho Dac Loc, Vietnam National University, Vietnam
  • Yi-Hung Liu, Chung Yuan Christian University, Taiwan
  • Wen-Feng Lu, National University of Singapore, Singapore
  • Kathy Luo, Nanyang Technology University, Singapore
  • Ferat Sahin, Rochester Institute of Technology, USA
  • Juhng-Perng Su, National Yunlin University of Science and Technology, Taiwan
  • Yoshiyuki Tanaka, Hiroshima University, Japan
  • Ching-Chih Tsai, National Chung Hsing University, Taiwan
  • Wen-Wei Tsai, Chang Gung University, Taiwan
  • Zhi-Gong Wang, Southeast University, P.R. China
  • Chin-Long Wey, National Central University, Taiwan
  • Wen-Shyong Yu, Ta Tang University, Taiwan
  • Yong-Ping Zheng, The Hong Kong Polytechnic University, Hong Kong

Human Centered Medical Modality Group:

  • Hannes Bleuler, Swiss Federal Polytechnic University, EPF (Lausanne), Switzerland
  • Yi-Ping Chao, Chang Gung University, Taiwan
  • Shuo Hung Chang, National Taiwan University and ITRI, Taiwan
  • Chi-Ming Chen, Indurstrial Technology Research Institute, Taiwan
  • Sandy Chian, Nanyang Technology University, Singapore
  • Dimitrios Dakopoulos, University of Texas at San Antonio
  • Arthur G. Erdman, University of Minnesota, USA
  • Osamu Fukuda, National Institute of Advanced Industrial Science and Technology, Japan
  • Yen Liang Hsu, Yuan Ze University, Taiwan
  • Cheng-Nan Hu, Oriental Institute of Technology, Taiwan
  • Yo-Ping Huang, Ta Tang University, Taiwan
  • Ishtiaq Rasool Khan, Institute for Infocomm Research, Singapore
  • Ning Lan, Shanghai Jiao Tong University, P.R. China
  • Ming-Yih Lee, Chang Gung University, Taiwan
  • Tzuu-Hseng S. Li, National Cheng Kung University, Taiwan
  • Wen-lung Li, National Taipei University of Technology, Taiwan
  • Guan-Yong Liang, Nanyang Technology University, Singapore
  • Alan C. Lin, Natonal Taiwan University of Science and Technology, Taiwan
  • Arthur Fuk-Tat MAK, The Hong Kong Polytechnic University, Hong Kong
  • Erich Schneider, University Hospital of Munich - Grosshadern, Germany
  • Tsu-Wang Shen, Tzu Chi University, Taiwan
  • Ben Sheng, Indurstrial Technology Research Institute, Taiwan
  • Wei-Hong Wang, Southeast University, P.R. China
  • Yoshihiro Yamamoto, Hiroshima City University, Japan
  • Wen-Wei Yu, Chiba University, Japan
  • Yuesheng Zhu, Peking University, P.R. China

Cybernetic Intelligence Applications Group:

  • Tomohiro Amemiya, NTT Communication Science Laboratories, Japan
  • Fang Chang, Indurstrial Technology Research Institute, Taiwan
  • Li-Chen Fu, National Taiwan University, Taiwan
  • Gwo-Jou Huang, Indurstrial Technology Research Institute, Taiwan
  • Chung-Hsien Kuo, Chang Gung University, Taiwan
  • Cheng-Kuang Lee, Chang Gung University, Taiwan
  • Feng Lin, Nanyang Technology University, Singapore
  • Keck-Voon Ling, Nanyang Technology University, Singapore
  • Yi-Hung Liu, Chung Yuan Christian University, Taiwan
  • Vasily G. Moshnyaga, Kyoto University, Japan
  • Kai-Tai Song, National Chiao Tung University, Taiwan
  • Nguyen Tan Tien, Vietnam National University, Vietnam
  • Kai-Yu Tong, The Hong Kong Polytechnic University, Hong Kong
  • Sameeh Ullah, University of Waterloo, Canada
  • Ching-Chang Wong, Tamkang University, Taiwan
  • Wen-June Wong, National Chi Nan University, Taiwan
  • Yongnian Yan, Tsinghua University, P.R. China
  • Ping-Lang Yen, National Taipei University of Technology, Taiwan
  • Daniel Yeung, The Hong Kong ploytechnic University, Hong Kong
  • Xiaoxing Yin, Wang, Southeast University, P.R. China
  • Wen-Shyong Yu, Ta Tang University, Taiwan

Recent Activities

  • Participated in the soccer robot competitions of the RoboCup 2012 (Mexico City)
  • Participated in the autonomous robot competitions of the FIRA 2012 (Bristol UK)
  • Participated in the soccer robot competitions of the RoboCup 2011 (5-11 July 2011, Istanbul, TURKEY)
  • Participated in the autonomous robot competitions of the FIRA 2011 (Kaohsiung, TAIWAN)
  • Organized special session on Intelligent Rehabilitation Robots and Systems at 34th International Symposium on Robotics (ISR2012) in Taipei, August 2012, Taiwan
  • Organized international Symposium on Bioengineering (2012 SETBHA) in April 2012
  • Organized special session on Emerging Technologies in Medical Mechatronics at 2011 International Conference on System Science and Engineering (2011 ICSSE) in Macau, June 2011.
  • Organized special session on Medical Mechatronics at IEEE SMC -2011 in Anchorage, Alaska, October 2011 in USA.
  • Organized special session on Medical Mechatronics at IEEE SMC -2010 in Istanbul, October 2010 in Turkey.
  • Organized special session on Medical Mechatronics at IEEE SMC -2009 in San Antonio, TX, October 2009 in USA.
  • Organized workshop on Post-surgery Assessment of Medical Robot at National Taiwan University of Science and Technology, Taipei, May 2009 in Taiwan.
  • Organized workshop on Rehabilitation Robot at Chang Gung University, Tao-Yuan, April 2009 in Taiwan.
  • Organized an annual conference on Biomedical Engineering ISOBME-2008 in Tao-Yuan, December 2008 in Taiwan.
  • Organized an International Symposium on Biomedical Engineering -2008 in Tao-Yuan, December 2008 in Taiwan.
  • Organized special session on Medical Mechatronics at IEEE SMC -2008, October 2008 in Singapore.

Join Us

  • Do creative meaningful research and development.
  • Interact with knowledgeable colleagues.
  • Visit exotic conference locations.
  • Participate in exciting conferences and workshops that will help you get funding.
  • Be published in quality journals.
  • Live a life of discovery on your terms.
  • Be a part of a joint special interest group in Medical Mechatronics.
  • Promote research and academic-industry cooperation in Medical Mechatronics.
  • Enhance international research and education collaboration.

 


Back to top